Agri Vehicles Insurance from Greenlands

Author Topic: Shearing Angoras  (Read 2308 times)

Goats!!!

  • Joined Aug 2016
Shearing Angoras
« on: April 19, 2018, 08:18:31 pm »
We only have two Angoras, and shear them ourselves, I have sure clip clippers and two different sets of blades, one came with the clippers and are meant for sheep they have 20 teeth, the other set has 13 teeth, these do go through the fleece better but do tend to nick one of the goats particularly. So what do people use? We have just done them with hand shears as the blades  seem to need sharpening and just wouldn't go though, they were long due to the weather being so cold so overdue to be done. Will look to buy new blades at the same time as getting the others sharpened.
Thanks

Dogwalker

  • Joined Nov 2011
Re: Shearing Angoras
« Reply #1 on: April 20, 2018, 04:42:05 am »
You need the 20 or 23 teeth ones that curve in at the sides.  The cutters and combs need to be really sharp and oil the blades frequently.
It's really easy to cut the goats badly, Their skin is very thin and lose especially around their underarms and legs.  Keep the skin tight and go carefully.

Where in the country are you?

Goats!!!

  • Joined Aug 2016
Re: Shearing Angoras
« Reply #2 on: April 20, 2018, 11:53:41 am »
Thank you, we are, on the Powys/ Shropshire borders, I will get more blades, though the ones we have have only been used a couple of times.

Dogwalker

  • Joined Nov 2011
Re: Shearing Angoras
« Reply #3 on: April 21, 2018, 06:06:12 am »
R.T Anthony near Leominster will know which one if you say for angoras.  One cutter and one comb, the cutter you already have will probably fit fine,  they do sharpening too, quick return post.
Do you know the Welsh and West angora club, worth the £10 membership for the advise available.


Goats!!!

  • Joined Aug 2016
Re: Shearing Angoras
« Reply #4 on: April 21, 2018, 04:34:32 pm »
I know R T Anthony, have used them for the horse blades, will look into the Welsh and West Angora club.
Thanks again.

Dogwalker

  • Joined Nov 2011
Re: Shearing Angoras
« Reply #5 on: April 22, 2018, 05:29:19 am »
Three of us will be at Wonderwool as 'A Crafty Goat Club' and at the Spring Festival in the angora building doing a mohair display and have-a-go at spinning, weaving etc.

Talana

  • Joined Mar 2014
Re: Shearing Angoras
« Reply #6 on: April 23, 2018, 09:31:46 am »
You can use dog clipers you do get wide blades now, angoras no different than a matted poodle x dog, dog clippers ligher on hands no vibration and a lot safer than sheep clippers. Again they need to be sharp and oil only on he contact part of blade slide top part then oil.with a5 clippers 7F blade suitable or can do he shorter ones 10 8.5 Take time with clppers don t force them, Aescalup clippers also do an angora goat blade. or hand shears eg jakoti ones good

 

Forum sponsors

FibreHut Energy Helpline Thomson & Morgan Time for Paws Scottish Smallholder & Grower Festival Ark Farm Livestock Movement Service

© The Accidental Smallholder Ltd 2003-2024. All rights reserved.

Design by Furness Internet

Site developed by Champion IS