Agri Vehicles Insurance from Greenlands

Author Topic: P6e Wheels - wanted  (Read 4908 times)

Beewyched

  • Joined Feb 2011
  • South Wales
    • tunkeyherd.co.uk
P6e Wheels - wanted
« on: February 01, 2012, 09:08:03 pm »
Desperately needing 2 replacement wheels for  my trailor, they don't necessarily need to have tyres on them.  I'm 15 miles west of Glasgow & willing to travel to collect them.
Tunkey Herd - registered Kune Kune & rare breed poultry - www.tunkeyherdkunekune.com

robert waddell

  • Guest
Re: P6e Wheels - wanted
« Reply #1 on: February 01, 2012, 09:38:32 pm »
its a long time since you have been on   anyway from memory your wheels are quite narrow unless you have bought a different one      the best place to get them is an ifor Williams dealer and cheaper (really) :farmer:

Beewyched

  • Joined Feb 2011
  • South Wales
    • tunkeyherd.co.uk
Re: P6e Wheels - wanted
« Reply #2 on: February 02, 2012, 09:23:51 am »
Hi Robert  :wave:

Yep, I'm back  :wave:

Ivor Williams cheaper  :o that's gotta be a first.  I'll give them a bell today

Say hello to Lillian for me

Tunkey Herd - registered Kune Kune & rare breed poultry - www.tunkeyherdkunekune.com

tobytoby

  • Joined May 2011
  • north ayrshire
Re: P6e Wheels - wanted
« Reply #3 on: February 02, 2012, 01:33:30 pm »
Give me your rim sizes and how many studs and i will see what i can get you (for free.)

Grant

Beewyched

  • Joined Feb 2011
  • South Wales
    • tunkeyherd.co.uk
Re: P6e Wheels - wanted
« Reply #4 on: February 02, 2012, 03:23:43 pm »
 :wave: I've pm'd you  :wave:
Tunkey Herd - registered Kune Kune & rare breed poultry - www.tunkeyherdkunekune.com

digit

  • Joined Sep 2009
  • near Swansea
Re: P6e Wheels - wanted
« Reply #5 on: February 02, 2012, 03:29:19 pm »
Some trailers have a grease nipple on the hub, you'll need a rim with a notch in it to go over the grease nipple.
http://www.ebay.co.uk/itm/Trailer-Parts-Wheel-Rim-3-50x10-4-Stud-4-pcd-C-N-Suits-145x10-500x10-Tyre-/120844600461?pt=UK_Trailers_Transporters_Parts&hash=item1c22e6448d

tobytoby

  • Joined May 2011
  • north ayrshire
Re: P6e Wheels - wanted
« Reply #6 on: February 02, 2012, 03:35:02 pm »
Lynne,
Does your wheel look like digits link above?

Beewyched

  • Joined Feb 2011
  • South Wales
    • tunkeyherd.co.uk
Re: P6e Wheels - wanted
« Reply #7 on: February 02, 2012, 04:43:50 pm »
Yes, I believe it does - I thought it was rust damage  :-[
Tunkey Herd - registered Kune Kune & rare breed poultry - www.tunkeyherdkunekune.com

HappyHippy

  • Guest
Re: P6e Wheels - wanted
« Reply #8 on: February 02, 2012, 07:04:42 pm »
This looks to be a similar one with a tyre from Northern Tool (a wee bit cheaper ;)) Obv. without exact sizes and stuff it's just a guess  :-\ http://www.northerntooluk.com/tyres-and-wheels-and-castors/steel-wheel-assemblies/trailer-wheel-assembly-40-x-8_130161E.html?fhsearchterm=trailer+wheel?tab=reviews

Though Tobytoby's would be a better price altogether  ;) ;D ;D ;D

robert waddell

  • Guest
Re: P6e Wheels - wanted
« Reply #9 on: February 02, 2012, 07:15:05 pm »
all wheels are not the same  diameter   width    offset or inset  pcd the spacing of the wheel studs or bolts
ifor Williams are cheaper for tyres special ones for trailers normal tyre suppliers just cant compete on price on a like for like basis :farmer:

robert waddell

  • Guest
Re: P6e Wheels - wanted
« Reply #10 on: February 03, 2012, 05:25:34 pm »
had a look at my p6e wheels today they are stamped as follows
VLUKON
T.3031
6.00X10H2
tyre size=20.5x8-10
and the spacing betwean the bolt holes is 100mm
but when i saw at at the gow show you had narrower tyres and wheels :farmer:

Beewyched

  • Joined Feb 2011
  • South Wales
    • tunkeyherd.co.uk
Re: P6e Wheels - wanted
« Reply #11 on: February 03, 2012, 07:17:17 pm »
Thanx Karen, I will have a look at this site.

Robert - I thought I was confused before  ::) now I'm completely befuddled !  How can such a little trailor have so many wheel types - arrrrgh  ???
Tunkey Herd - registered Kune Kune & rare breed poultry - www.tunkeyherdkunekune.com

tobytoby

  • Joined May 2011
  • north ayrshire
Re: P6e Wheels - wanted
« Reply #12 on: February 04, 2012, 11:31:29 am »
Lynne,

Sorry but i can't get you the wheels (wrong type & size).
I assume you are moving piggies - if not, i have a wee trailer you could use?

Grant

Beewyched

  • Joined Feb 2011
  • South Wales
    • tunkeyherd.co.uk
Re: P6e Wheels - wanted
« Reply #13 on: February 04, 2012, 07:50:49 pm »
Thanx Grant,

Yep - it's for piggies - ones that should have gone to the abattoir before Xmas  ::)

I may have some luck though - the local feed merchant gets a loan of a horse trailor when she needs to, she reckoned that as long as I washed it out, her friend would never know it was used to carry pigs  ???

I have told her she MUST ask her friend - I wouldn't like loaning stuff to someone to find half the neighbourhood's been using it  :o
Tunkey Herd - registered Kune Kune & rare breed poultry - www.tunkeyherdkunekune.com

 

Forum sponsors

FibreHut Energy Helpline Thomson & Morgan Time for Paws Scottish Smallholder & Grower Festival Ark Farm Livestock Movement Service

© The Accidental Smallholder Ltd 2003-2024. All rights reserved.

Design by Furness Internet

Site developed by Champion IS