Hi,
We use electric mesh round the hen run, similar to this
https://www.electricfencing.co.uk/standard-poultry-net-50m-x-1-1m-poultry-net.html The horizontal wires are energised, except for the black one along the bottom.
Something we always struggle with is the fact that it is square mesh rather than diamond, so unless the ground is completely flat and posts completely vertical the mesh doesn't fully spread out and the bottom part sags. It happens a bit even on straight runs. This sagging means that the bottom few strands want to sort of roll up and lie on the ground. The attachment shows an example.
Has anyone found similar, and if so have they come up with some convenient solution? We've been making do by tweaking the bottom the fence to try and get the lower meshes to stand up, and using odd pegs and bits of stick to try and keep it propped up.
Thanks,