The Accidental Smallholder Forum
Smallholding => Equipment => Topic started by: Penninehillbilly on May 26, 2017, 01:14:06 pm
-
Hi
I have a folding lockable knife, light and very useful, but need a new blade.
Not a standard Stanley, same size and shape but 4 holes for locking blade in.
Not in Screwfix or Toolstation catalogues, name tag has come off knife.
Any ideas where to get blades from Please?
-
These should do?
http://www.safetyshop.com/standard-replacement-blades.html?gclid=CjwKEAjwpJ_JBRC3tYai4Ky09zQSJAC5r7ruPEW28gie0xEcavGsH5fdMHxzERDEPVH8XcyxCq9EuxoCMIXw_wcB (http://www.safetyshop.com/standard-replacement-blades.html?gclid=CjwKEAjwpJ_JBRC3tYai4Ky09zQSJAC5r7ruPEW28gie0xEcavGsH5fdMHxzERDEPVH8XcyxCq9EuxoCMIXw_wcB)
-
Looks like mine - Rolson
https://www.plumbnation.co.uk/site/rolson-spare-blades-for-trimmimg-knife--pack-of-20-/?gclid=CjwKEAjwpJ_JBRC3tYai4Ky09zQSJAC5r7ruJIKcP-PJgyWtkwch5fhJy4GYi2qSsYkq_0zS4c8KmxoCPW3w_wcB (https://www.plumbnation.co.uk/site/rolson-spare-blades-for-trimmimg-knife--pack-of-20-/?gclid=CjwKEAjwpJ_JBRC3tYai4Ky09zQSJAC5r7ruJIKcP-PJgyWtkwch5fhJy4GYi2qSsYkq_0zS4c8KmxoCPW3w_wcB)
-
Thanks
Doganjo, it needs 4 holes, the little button retracts 2 'bolts' that lock in and grip the blade safely,
Olli, looks possible but not sure it will hold firmly with one of the pair of holes being bigger. Worth trying if I can't find the proper ones.
Annoying thing is I can find pictures but if I click on them it just shows standard type :-(.
-
Its cheaper to buy the whole knife again in the long run - terrible throw away society we live in.
Or buy a good whitby and a grinding stone and some oil :)
-
Seen some about tenner + £5 p&p, will outlast the knife but presume we can use them in standard holders, just hope quality is up to some work :- ).
Now just have to find them again .