The Accidental Smallholder Forum
Smallholding => Techniques and skills => Topic started by: Jaymac76 on February 13, 2016, 08:15:25 am
-
Hi, just got myself a new tractor well new to me a 1989 ford 3910 and I am looking for a rotovator for it, what size would be best. The distance between the back wheels are approximately 6' would the rotovator need to be that length to cover the tyre tracks.
-
Weve got a howavrd rotovator which is smaller than the wheelbase but when it is working it is offset so it always rotovates one wheel. Someone more experienced will add a bit more Im sure!!
-
Can you hire one to start with? When we started a new veg plot we did so and concluded that its ability to churn the clay soil into slurry with one pass meant it wasn't as effective as covering the soil with cardboard over Winter and letting the worms do the work for us.
-
Interesting, I have a not so great area that I want to turn into an allotment. I was thinking of getting a rotavator to kick start the land but have got one of the Charles Dowding no-dig books for Christmas so will be giving that a go. Unfortunately the land is not level at the moment so I can't report on any progress as it has been too wet to get the area levelled before I start.
http://www.charlesdowding.co.uk/ (http://www.charlesdowding.co.uk/) for more info on his suggested method.
-
They used to rekon with rotavators you need one horse power per inch width of the rotavtor,
That's why as mentioned above you get offset ones of a narrow width to suit tractors of approx 45hp.
A 6ft one is 72 inch so roughly 70 horse power required,
That said I have seen and indeed used a 60 inch one on a mf135 at about 47hp so long as the land is not too heavy, you can compensate with very slow forward speed and not too deep. Make multiple passes if necessary.
What hp is a ford 3910 ?