The Accidental Smallholder Forum
Smallholding => Equipment => Topic started by: graham-j on October 10, 2014, 09:38:30 am
-
Hi what is the best thing to re-flaw an old 3 tonne farm trailer with.I'm thinking 3/4 ply but is that up to it,what about when it gets wet.
Also new drop sides is 6" X 1" pine boarding enough or should I use scaffold boards.
This is more about making an old trailer usable than how it looks.
Thanks Graham.
-
New Ifor trailers come with a sheet of ply for the base, but the outer veneer is made of a tough plastic rather than wood. I wonder if you can source a sheet of that from somewhere. Does anybody know what it's actually called?
-
Does anybody know what it's actually called?
Phenolic plywood. http://www.advancedtechnicalpanels.co.uk/products/buffalo-board-birch-plywood (http://www.advancedtechnicalpanels.co.uk/products/buffalo-board-birch-plywood)
Look on ebay for "phenolic trailer flooring".
-
That's the stuff - thanks Midtown! :thumbsup:
This is the biggest problem with living in the age of Google - if you don't know what it's called, you can't search for it! ;D
-
Hi,thanks for the reply,that’s the stuff for sure
.How about for the sides what would you use for them.
Thanks Graham
-
For a dropside, I'd stick with your original idea of pine floorboarding. My old trailer got these, but before fitting and after cutting the required lengths, they were treated to liberal applications of creosote.
If they're likely to be subject to damage during use, you could line the inner face with aluminium plate or thin marine ply which could be easily replaced in the event of damage.
-
I wold say marine ply also.
-
Just a thought - how about decking boards? Cheap, easy to to work with, won't rot.....
-
Ours was floored with decking years ago, still looks good. lasts better with abuse like hardcore than the ply.
-
Hi,in the end I have used scaffold boards fo the flaw.I am now dithering between useing 6" X 1" pine boards for the sides or continue with the scaffold boards.
Thanks Graham.