The Accidental Smallholder Forum
Livestock => Sheep => Topic started by: plumseverywhere on May 25, 2012, 02:47:14 pm
-
My Clik gun has arrived so I'm now fully prepared to treat the 3 lambs who are not for shearing this year. Will do the shearlings once the Singing Shearer has given them their haircut (or a few weeks after as they'll be low risk immediately I understand?)
The gun comes with 2 springs that for the life of me I can't imagine play a part in actual application so assume they are replacements for inner workings of the plastic gun?
Would it be prudent for me to practise with water or something first (can you tell I'm nervous about using this stuff?!)
Any tips, gratefully received. First time we've done this. Last year we had to emergency crovect and ended up doing it with a water spray bottle ::)
I've got the weights as we only wormed the woollies a couple of weeks ago so I know the adults (when its their turn) are over 50kg and the lambs are 20kg. scary. have roped reluctant hubby in to help.
-
Do the springs fit on the tubing that goes between the gun and the bottle? if so, they are tube strainers thingis that help grip the tube onto the gun & bottle ends.
And yes, practise first with water, I did. Practise with the dose measurement that you are going to apply, then you can work out how hard you have to press the trigger to get a good steady spray. You don't want it all coming out in one big splurge :)
-
Yes the springs go on the plastic tubing to help keep it tight onto the gun and bottle and stop any kinks. The smaller the animal the nearer the gun needs to be to get the right spray width, as per the instructions set the gun for half the dose , spine first then tail head :farmer:
-
That is brilliant. Thank you.
-
All done :thumbsup: thanks for the tips! Another milestone in our new life as sheep owners. Will be less nervous next time.
All made sense with the springs once we put it together - thanks shep53. Spraying went pretty well too.
Pink suits them ;)