The Accidental Smallholder Forum
Smallholding => Equipment => Topic started by: Old School on May 08, 2019, 09:36:54 pm
-
Hi.
New to the forum, wondered if anyone has experience of these International mowers.
Last year I replaced bearings and seals on the pto spindle, but by the end of mowing the lower flywheel spindle began to leak oil, so before I use it again I am attempting to replace the lower seals and possibly bearings.
It looks to me that the flywheel needs to be removed from the shaft (keyed) but would like to know from someone who may have already done this job!
Any knowledge gratefully received.
Thank you :)