The Accidental Smallholder Forum
Community => Coffee Lounge => Topic started by: Jim42 on June 01, 2022, 11:10:39 am
-
Hi. Have read some interesting posts on here re Rayburns. So hoping somebody may be able to help :D
I have a Rayburn 355SFW that I have been operating for years using Phenacite and wood successfully. Now to be told by my local merchant they are no longer going to stock it :( I have been researching alternatives but am bambozzled by the number of ovids available.
Is any body able to tell me what works well for them on a Rayburn 355SFW.
-
I don't have a Rayburn, but I have a couple of MF stoves, one being a MK2 little Wenlock.
Before they screwed with the mix, she ran well on Maxibrite. She also likes Phurnacite (I have couple of tonne in stock for emergencies! Mum isn't allowed to touch it, she shovels it On as if it grows on trees!).
My coalman a couple of yrs ago recommended Multiheat and I've used that quite satisfactory by itself AND with wood. Coalman also says that there is a difference between heat rolled & cold cured. I look at the DEFRA smoke control site for suitable fuels, got paranoid actually comparing the ingredients and the %'s of different mixes!
Dad has a Deville boiler cooker and uses Burnwell Blend but DOESN'T like the new mix. He does however like Union nuggets as they don't clinker. There are certain fuels that yes, they belt out the heat, to me they are too high in the PetCoke!
-
Interesting! We found that 'burnwell'..... er, didn't!
We now get what the coalman calls "red", but I can't find anything about it online. Can you get a few sacks of each option to try, before committing to a tonne?
-
My husband is a coal merchant so I showed him this post - he says Union briquettes are good but don't last very long. He stocks Oxbow products and recommends the Oxbow Red for use on a Rayburn - we have a lot of customers using this product and it's very popular.
https://www.fpritchardcoalmerchants.co.uk/products
-
Thanks for the info.
It was good to know i'm not the only one that was a little overwhelmed by the number of ovid fuel options and advice based on experience is always better i think.
Thanks
-
what does your husband think of the increase in prices and is he managing to get stock in? I'm a merchant in South Wales and anthracite is in very short supply at the moment.
-
He's horrified by the increase in prices and getting loads in is tricky as the drivers only want to come to us if they have a load to take back the other way due to the increased fuel costs. The yard is pretty full at the moment but we've not received all of the orders that we've placed.
-
We have a local yard 10 minutes away but he is struggling to get bulk loads in. If we go direct to the mine it is a 60 mile round journey and 1 1/2 hours travelling. So far this year there have been 5 price increases. We have been told to warn our customers there will be a shortage this winter and definitely another price increase in October when the cap is raised.