Agri Vehicles Insurance from Greenlands

Author Topic: I've bought a rotavator/new toy!  (Read 7894 times)


  • Joined Jun 2013
  • South Wales .Carmarthenshire. SA18
Re: I've bought a rotavator/new toy!
« Reply #15 on: April 09, 2014, 11:33:17 pm »
Photos would be very helpful .

You seem to have an oil bath oil filter , which would normally have a steel wire element or a very large hole open cell foam one .

 They are usually washed out in neat petrol , left to dry and then washed in a 50 /50 mix of petrol & engin oil then left to dry /drain down  for an hour or so to get the element lightly re oiled and sticky enough to catch dust .
Strong belief , triggers the mind to find the way ... Dyslexia just makes it that bit more amusing & interesting

Dreich Pete

  • Joined Jan 2014
  • Aberdeenshire
Re: I've bought a rotavator/new toy!
« Reply #16 on: April 10, 2014, 08:10:15 am »
The air filter consists of a oil reservoir with a plastic mesh/sponge filter leading up into the system. I've ditched the old oil as it was clearly contaminated and was looking a bit emulsified. I need to refill it with something, but I know it wasn't the cause of the engine death.

I removed the carb and gave it a few days of drying inside the house, and I flushed the petrol tank the other day and left it to dry on the underfloor heating. I put the whole lot back together again yesterday and gave it a little FRESH petrol and a single squirt of Easi-start. Result: started second pull. Very pleased with the result, but also with myself for managing this after being such a numpty in the first place.

The engine is running a little unevenly, though not rough, and when I put the blades into gear it kills the engine once I start moving. I'm working on the assumption - after much thought last night - that it is because I'm not giving it enough revs once the blades are doing the work. I'll give it another try this morning.

It'd help if I knew what all four handlebar lever were for: one if the dead-man's clutch, one allows the handlebars to be pivoted to the side while it's in motion - for keeping out of the way when ploughing, presumably, and I think one of them is a brake.


Using a Cultivator/Rotavator

Started by Norfolk Newby (8.39)

Replies: 6
Views: 17440
Last post October 09, 2009, 08:57:52 am
by aparker155
Rotavator advice

Started by Dans (8.39)

Replies: 6
Views: 10284
Last post December 09, 2012, 01:55:22 am
by chrismahon
Rotavator seat

Started by vfr400boy (8.39)

Replies: 4
Views: 2018
Last post February 22, 2016, 08:22:27 pm
by vfr400boy
Any experience of a Howard 300 Rotavator?

Started by arobwk (8.3)

Replies: 22
Views: 6374
Last post July 27, 2021, 05:31:11 pm
by Kevm
Mini Mantis Rotavator - I'm considering

Started by arobwk (8.3)

Replies: 23
Views: 4188
Last post May 28, 2020, 07:20:30 pm
by arobwk

Forum sponsors

FibreHut Energy Helpline Thomson & Morgan Time for Paws Scottish Smallholder & Grower Festival Ark Farm Livestock Movement Service

© The Accidental Smallholder Ltd 2003-2021. All rights reserved.

Design by Furness Internet

Site developed by Champion IS